What factors contribute towards tyre wear and tear?

Tyres are an important part of a motorcycle and need to be maintained in order to ensure safety while riding. There are many factors that can contribute to their wear and tear, some of which are preventable. Some manufacturers claim that you can ride on them until they are ten years old. Even if your motorcycle tyres appear to be in good condition after five years, have them evaluated by a technician or vendor who sells motorcycle tyres online in Sri Lanka once a year. Motorcycle tyres online in Sri Lanka are never expected to endure more than ten years.

1. They wear down for a variety of reasons, including incorrect inflation, driving on rough roads, and braking harshly.

• Tyre inflation: When your motorcycle tyres are not inflated to the correct pressure, it can cause them to wear down more quickly. When they are not inflated correctly will also be less stable and could lead to a dangerous situation while riding.

• Driving on rough roads: When you drive your motorcycle over uneven surfaces or potholes, it puts extra stress on them, which can lead to faster wear and tear.

• If you brake too hard or suddenly on your motorcycle, it can cause skidding and wear down more quickly.

Fortunately, there are ways that you can prevent this type of wear and tear from happening. These include such things as:

• Checking the pressure on a regular basis and ensuring that it is inflated to the proper level.

• Avoiding driving on rough roads or over potholes.

• Braking gently and gradually when necessary.

By following these tips, you can help extend the life of your motorcycle tyres and ensure a safer ride.

1. Over time, tyres will lose their elasticity and grip, which can lead to skidding or aquaplaning.

Over a period of time, tyres can lose their elasticity and grip, which can lead to skidding or aquaplaning. This is why it is important to check the pressure regularly; if they are over-inflated, they will be less likely to lose their grip.

Aquaplaning is when the tyre rides on a thin film of water and can no longer grip the road, which can lead to a loss of control. To avoid aquaplaning, make sure that they are inflated to the correct level and drive slowly in wet weather conditions.

If you do find yourself skidding, don’t brake suddenly, as this will only make the situation worse. Instead, gently apply pressure to the back brake while releasing the throttle until you have regained control of the bike.

1. Drivers should regularly check their pressure and tread depth to ensure they are performing at their best.

Pressure is one of the most important factors when it comes to tyre wear and tear. If they are over-inflated, they will wear out more quickly on the sides; likewise, if they are under-inflated, the centre will wear down more quickly.

It is also important to check your tread depth regularly as this affects how well your they grip the road. The legal minimum tread depth in the UK is 0.08 inches (approximately two millimetres), but it's recommended that you aim for a depth of at least 0.12 inches (three millimetres) for optimum safety.

If you notice that your tread depth has fallen below these levels, it is time for a new set of tyres!

1. There are a number of ways to extend the life of your tyres, including:

• Regular rotations and alignments: By regularly rotating them, you will even out the wear and tear, meaning that they will last longer. It is also a good idea to have your bike's alignment checked regularly to ensure that the wheels are aligned correctly;

• Avoid potholes and other road hazards. Potholes can cause serious damage to your tyres, so try to avoid them where possible. Other road hazards, such as gravel and debris, can also cause damage.

• Maintaining correct air pressure: Ensuring that they are inflated to the correct pressure is crucial for keeping them in good condition. Overinflating or underinflating them can lead to premature wear and tear.

• Use the proper oil weight: Using too much or too little oil in your motorcycle can cause them to wear out faster. Consult your owner’s manual to find out the correct weight of oil for your bike;

• Avoid hard acceleration and braking: When you accelerate or brake too harshly, it puts a lot of stress on the tyres, which can lead to premature wear and tear. Try to accelerate smoothly and brake gradually where possible.

If you detect wear and tear on your tyres, then it is time to replace them with new ones. By not replacing them, you could be putting yourself and other road users at risk. Always consult a professional to find the correct type for your motorcycle and ensure that they are fitted correctly.

Buying the right size is important, too. If they are too small, then you will experience more wear and tear as the bike will be working harder to move around. Conversely, if they are too large, you may lose traction and control when cornering.

There you have it! Now you know what factors contribute towards tyre wear, whether they be motorcycle or three-wheel tyres online in Sri Lanka. By following these simple tips, you can help to extend their lifespan and keep yourself safe on the roads. Happy Riding!